Current Nigerian Electricity Health & Safety Manual

1. Keep Water Away from Electricity: Never touch electrical appliances, switches, or outlets with wet hands or while standing in water, as water is an excellent conductor and causes fatal shocks. 2. Do Not Overload Outlets: Avoid plugging too many appliances into a single outlet or extension cord, as this can cause overheating and trigger electrical fires. 3. Inspect Cords and Plugs Regularly: Check for frayed, cracked, or damaged insulation on wires. Replace damaged cords immediately rather than repairing them with electrical tape. 4. Use Ground Fault Circuit Interrupters (GFCIs): Install GFCIs in high-moisture areas like kitchens, bathrooms, and outdoors to automatically break the circuit if a fault occurs. 5. Turn Off Power Before Repairs: Before working on any light switch, outlet, or appliance, turn off the power at the main circuit breaker panel, not just the switch. 6. Unplug Appliances Properly: When removing a plug from a socket, pull the plug itself, not the electrical cord, to prevent damaging the wiring. 7. Use Childproof Outlets: Install safety caps or child-resistant outlets to prevent children from inserting objects into the sockets. 8. Avoid Using Metal Ladders Near Wires: When performing maintenance or working outside, use fiberglass or wooden ladders to avoid electrocution from overhead power lines. 9. Never Replace Fuses with Incorrect Sizes: Only use fuses of the correct amperage rating to prevent overloading and potential fire hazards. 10. Call a Professional Electrician: Avoid DIY repairs for major electrical work. Always hire qualified professionals for wiring, panel work, or when flickering lights indicate a deeper issue. SafetyCulture